Ruud Air Handlers

Hard Working & Honest, Our Name is Our Promise

Ruud.

Ruud's exciting line of air handlers has the right model, size, and efficiency rating that your home and family deserve.

Select a Model to Learn More:

Ruud Air Handler (RWMV).

RWMV
Ruud Air Handler (RHMV).

RHMV
Ruud Air Handler (RH2T).

RH2T
Ruud Air Handler (RH2V).

RH2V
Ruud Air Handler (RH1V).

RH1V
Ruud Air Handler (RH1T).

RH1T
Ruud Air Handler (RF1T).

RF1T
Ruud Air Handler (RF1P).

RF1P
Ruud Air Handler (RWMV).

Hydronic Air Handler - Powered by Tankless Technology (RWMV)

Hydronic Air Handler

  • Low profile 34-inch design is lighter, easier to handle and leaves room for optional accessories

  • Left or right side electric connections

  • Integrated control board features diagnostics, manages all operational functions and provides hookups for humidifier and electronic air cleaner

  • An insulated blower compartment makes it one of the quietest hydronic air handlers on the market today

  • Pre-paint galvanized steel cabinet

  • Molded permanent filter(s)

  • Transformer and control fuse protection

  • Solid bottom is standard

  • A variety of cooling coils and plenums designed to use with the Hydronic Air Handler are available as optional accessories for air conditioning models

  • Stainless steel water pump

  • Field covertiable for vertical downflow, horizontal left hand, or right hand air supply

  • Energy efficient ECM motor which slowly ramps up speed for quiet and finely tuned operation to maintain constant CFM

  • Factory installed indoor coil

  • Pump control knob allows adjustment of the differential between the inlet water temperature and outlet air temperature.

Tankless Water Heater

  • Industry best! Minimum flow rate of .26 GPM, minimum activation flow rate of .40 GPM

  • ENERGY STAR® rated models available

  • Next generation burner technology

  • UMC-117 remote control and 10 ft. of thermostat wire is included

  • EZ-Link™ cable available for high demand applications to connect two tankless units to operate as one

  • High-altitude capability - up to 8,400 ft. elevation above sea level (no chip required)

  • Intelligent electronic controls designed to increase energy efficiency and safety

  • Self Diagnostic System

  • Rheem Exclusive! Built-in Condensate Neutralizer for safe disposal of condensate.

  • Rheem Exclusive! Overheat Film Wrap Safetly shuts down the heater at unsafe temperatures.

  • All models are compatible with 1/2" gas line.

  • Condensing models vent with PVC for easier installations.

^ Back to Top

Ruud Air Handler (RHMV).

EcoNet™ Enabled High Efficiency Modulating with CFM Motor (RHMV)

  • The RHMV is EcoNet Enabled: This allows the RHMV to directly communicate with the EcoNet Smart Home System.

  • The RHMV features an Electronic Expansion Valve (EEV)

  • Features a constant CFM variable speed motor (ECM) which provides enhanced SEER performance. The RHMV is rated with UA17, UA20 air conditioners and UP17, UP20 heat pumps.

  • Evaporator is constructed of aluminum fins bonded to internally grooved aluminum tubing.

  • Versatile 4-way convertible design for upflow, downflow, horizontal left and horizontal right applications.

  • Factory-installed indoor coil.

  • Sturdy cabinet construction with 1.0 inch [25.4 mm] of foil faced insulation for excellent sound and insulating characteristics.

  • Field-installed auxiliary electric heater kits provide exact heat for indoor comfort. Kits include circuit breakers which meet U.L. and cUL requirements for service disconnect.

  • 11/2 ton [5.3 kW] through 5 ton [17.6 kW] models are between 421/2 to 57 inches [1080 to 1448 mm] tall and 22 inches [559 mm] deep.

  • All models meet or exceed 330 to 400 CFM [156 to 189 L/s] per ton at .3 inches [.7 kPa] of external static pressure.

  • Enhanced airflow up to .7" external static pressure.

  • Suitable for application in mobile homes.

^ Back to Top

Ruud Air Handler (RH2T).

High Efficiency - Two-Stage ECM Motor (RH2T)

  • The RH2T is EcoNet Enabled (EEV Option): This allows the RH2T to directly communicate with the EcoNet Smart Home System.

  • Feature an Electronic Expansion Valve (EEV)

  • The RH2T features a Constant Torque Two-stage motor (ECM) which provides enhanced SEER performance with most Ruud outdoor units.

  • Evaporator is constructed of aluminum fins bonded to internally grooved aluminum tubing.

  • Versatile 4-way convertible design for upflow, downflow, horizontal left and horizontal right applications.

  • Factory-installed indoor coil.

  • Sturdy cabinet construction with 1.0 inch [25.4 mm] of foil faced insulation for excellent sound and insulating characteristics.

  • Field-installed auxiliary electric heater kits provide exact heat for indoor comfort. Kits include circuit breakers which meet U.L. and cUL requirements for service disconnect.

  • 1½ ton [5.3 kW] through 5 ton [17.6 kW] models are between 42½ to 57 inches [1080 to 1448 mm] tall and 22 inches [559 mm] deep.

  • All models meet or exceed 330 to 400 CFM [156 to 189 L/s] per ton at .3 inches [.7 kPa] of external static pressure.

  • Enhanced airflow up to .7" external static pressure.

  • Suitable for application in mobile homes.

^ Back to Top

Ruud Air Handler (RH2V).

High Efficiency - ECM Motor (RH2V)

  • Includes an energy efficient ECM® Motor, which in most applications, enhances the SEER rating of the outdoor unit. It also slowly ramps its speed up for quiet operation and enhanced customer satisfaction.

  • Versatile 4-way convertible design for upflow, downflow, horizontal left and horizontal right applications.

  • Nominal airflow up to 1.0" external static pressure.

  • Factory-installed indoor coil.

  • Sturdy cabinet construction with 1.0 inch [25.4 mm] of foil faced insulation for excellent sound and insulating characteristics.

  • Field-installed auxiliary electric heater kits provide exact heat for indoor comfort. Kits include circuit breakers which meet U.L. and cUL requirements for service disconnect.

  • Dip switch settings for selectable, customized cooling airflow over a wide variety of applications.

  • On-demand dehumidification terminal that adjusts airflow to help control humidity for unsurpassed comfort in cooling mode.

  • External filter required.

  • Evaporator coil is constructed of aluminum fins bonded to internally grooved aluminum tubing.

^ Back to Top

Ruud Air Handler (RH1V).

High Efficiency - ECM Motor (RH1V)

  • Includes an energy efficient ECM® Motor, which in most applications, enhances the SEER rating of the outdoor unit. It also slowly ramps its speed up for quiet operation and enhanced customer satisfaction.

  • Versatile 4-way convertible design for upflow, downflow, horizontal left and horizontal right applications.

  • Nominal airflow up to 1.0" external static pressure.

  • Factory-installed indoor coil.

  • Sturdy cabinet construction with 1.0 inch [25.4 mm] of foil faced insulation for excellent sound and insulating characteristics.

  • Field-installed auxiliary electric heater kits provide exact heat for indoor comfort. Kits include circuit breakers which meet U.L. and cUL requirements for service disconnect.

  • Dip switch settings for selectable, customized cooling airflow over a wide variety of applications.

  • On-demand dehumidification terminal that adjusts airflow to help control humidity for unsurpassed comfort in cooling mode.

  • External filter required.

  • Evaporator coil is constructed of aluminum fins bonded to internally grooved aluminum tubing.

^ Back to Top

Ruud Air Handler (RH1T).

High Efficiency Constant Torque (ECM) Motor (RH1T)

  • RH1T feature a Constant Torque motor (ECM) which provides enhanced SEER performance with most Ruud outdoor units.

  • Versatile 4-way convertible design for upflow, downflow, horizontal left and horizontal right applications.

  • Factory-installed indoor coil. • Sturdy cabinet construction with 1.0 inch [25.4 mm] of foil faced insulation for excellent sound and insulating characteristics.

  • Field-installed auxiliary electric heater kits provide exact heat for indoor comfort. Kits include circuit breakers which meet U.L. and cUL requirements for service disconnect.

  • 11/2 ton [5.3 kW] through 5 ton [17.6 kW] models are between 421/2 to 551/2 inches [1080 to 1410 mm] tall and 22 inches [559 mm] deep.

  • All models meet or exceed 330 to 400 CFM [156 to 189 L/s] per ton at .3 inches [.7 kPa] of external static pressure.

  • Enhanced airflow up to .7" external static pressure.

  • Evaporator is constructed of aluminum fins bonded to internally grooved aluminum tubing

^ Back to Top

Ruud Air Handler (RF1T).

Front or Bottom Return - with ECM Motor (RF1T)

  • Front or Bottom Return

  • Flow Check Piston for cooling or heat pump operation

  • Wall-hanging brackets

  • Built in Filter Rack

  • AHRI Certified

  • UL Certified

  • Molex Plug Connections for field installed heater kits

  • Dual Voltage Direct Drive Blower with multi-speed motor

  • Thermoplastic Drain Pan with bottom primary and secondary connections

  • Optional Decorative Grill for front return applications

  • Optional Factory Installed Condensate Float Switch which shuts off the outdoor unit in event the condensate pan becomes clogged

^ Back to Top

Ruud Air Handler (RF1P).

Front or Bottom Return - with PSC Motor (RF1P)

  • Front or Bottom Return

  • Flow Check Piston for cooling or heat pump operation

  • Wall-hanging brackets

  • Built in Filter Rack

  • AHRI Certified

  • UL Certified

  • Molex Plug Connections for field installed heater kits

  • Dual Voltage Direct Drive Blower with multi-speed motor

  • Thermoplastic Drain Pan with bottom primary and secondary connections

  • Optional Decorative Grill for front return applications

  • Optional Factory Installed Condensate Float Switch which shuts off the outdoor unit in event the condensate pan becomes clogged

^ Back to Top